
The contact tip position in relation to the gas nozzle
Introduction During the MIG-MAG process, the contact tip can be mounted in the welding gun in different ways. This can have quite an impact on
Introduction During the MIG-MAG process, the contact tip can be mounted in the welding gun in different ways. This can have quite an impact on
Solid inclusions in welded joints have a negative effect on the integrity of a welded joint. If they are present in large quantities, they can
Cavities in welded joints have a detrimental effect on the integrity of a welded joint. The presence of large cavities may even cause the joint
The name for a standard might come across as something mysterious. There is, however, a quite logical explanation behind the prefixes and numbers.
There are many standards that apply to welding. What are they and more importantly, why are they important for the quality?
Cracks in welds are almost always unacceptable. Read about hot and cold cracks and what you can do to prevent them.
When a weld is made there will always be welding imperfections present. They are classified as defects if they negatively affect integrity and reliability of the weld. This article introduces different types of imperfections and ways to detect them.
We have been building a system of laws and rules, procedures and protocols for safe behaviour for a long time. Does that really work?
Instinctive natural behaviour How does our instinctive natural behaviour affect our safety in the modern industrial working environment? In other words: can we make good